AL6242-2408
AL6242-2408 Pelican Hardigg
Available Colors

Configuration:

PLEASE NOTE: Peli-Hardigg Single Lid cases shown may include optional, non-standard configurations that require additional specification and cost. Please contact Pelican Customer Service to discuss available configurations.

Commercial Quote
Product Features
  • One-piece construction, molded from lightweight, high-impact polyethylene
  • Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
  • Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
  • Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
  • Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
  • Reinforced corners and edges for additional impact protection
  • Recessed hardware for extra protection

Overview

PELICAN HARDIGG/ SINGLE-LID STANDARD COLORS
STD Grey 133
Fed Std #26270
STD Tan 250
Fed Std #20372
Blue 135
Pantone #292U
STD White 132
Fed Std #27925
STD Yellow 136
Pantone #012U
STD Green 138 - Forest
Fed Std #24052
Orange 134
Fed Std #12197
STD Yellow 131
Fed Std #23538
Maroon 197
Pantone #202U
STD Blue 101
Fed Std #25052
STD Black-032
Fed Std #27040
Red 130
Fed Std #21105
STD Olive Drab-137
Fed Std #34096
Purple-129
Pantone #245U



Specs

Measurements

Roto molded case dimensions vary +/- 2% case-to-case depending on the temperature and humidity. For cases requiring critical dimensions, please notify Pelican Customer Service in your quote request.

Interior (L×W×D) - Inches
61.97 x 42.31 x 31.94 in
Interior (L×W×D) - Centimeters
157.4 x 107.47 x 81.13 cm
Exterior (L×W×D) - Inches
65.98 x 45.67 x 39.59 in
Exterior (L×W×D) - Centimeters
167.59 x 116 x 100.56 cm
Capacity
Lid Depth
8.00 in (20.32 cm)
Bottom Depth
24.00 in (60.96 cm)
Weights
Weight
127.00 lbs (57.61 kg)
Temperature Range
Minimum Temperature
-20°F (-28.9°C)
Maximum Temperature
140°F (60°C)
Materials
Body Material
RotoMolded Polyethylene
Hardware Material
134
Optional Hardware Material
136
Handle Material
Heavy Duty Injection Molded Standard
Optional Handles Material
137
Latch Material
Steel (Nickel-black Plated)
O Ring Material
Silicone Sponge
Purge Body Material
Aluminum
Prv Valve Material
138
Foam Material
No Foam, empty case standard
Optional PE and PU, 1 and 2 lb. options filled and lined

Support

guarantee
For warranty information, see our
Guarantee of Excellence
support
For additional support,
contact us